档案编号:
施工进度:
The Green Mode PWM-ICs have internal start-up circuits with a 500V/750V rating; low EMI noise by frequency diffusion; linearly reduced switching frequency at light load for low standby power with protection functions. The Green Mode Quasi-Resonant ICs have internal start-up circuits with a 500V rating; intermittent or linearly reduced switching frequency; and protection functions. The Power Factor Correction ICs have correspondence to a wide power range; 75W to 1kW, and achieve high power Factor ≥ 0.99.
档案编号:
施工进度:
Fuji Electric offers a high performance and easy-to-use, easy-to-design planer type power MOSFET achieved by the 2nd generation “Quasi-Plane-Junction” technology. It maintains both low power loss and noise, lower RDS(on) characteristics, more controllable switching dv/dt by gate resistance, smaller VGS ringing waveform during switching, narrow band of the gate threshold voltage, and high avalanche durability.
档案编号:
施工进度:
The IGBT is a high performance 6th generation IGBT/FWD chipset with a compact design that provides for greater power output. It has environmentally friendly modules with easy assemblage, solder-free options, and RoHS compliance. The IGBT turn-on switching characteristics include: improved noise-loss trade-off, reduced turn-on dv/dt, and excellent turn-on dic/dt. Turn-off switching characteristics include: soft switching behavior and turn-off oscillation free.
档案编号:
施工进度:
Fuji Electric automotive qualified high performance IGBT modules use the latest 7th generation reverse conducting IGBT Chip. Fuji Electric´s IGBT modules for EV, HEV/PHEV employ a closed direct water-cooled aluminum jacket, which leads to a reduction of the thermal resistance about 40% compared to a conventional fin type heat sink and achieving high power density and a light weight compact package. With new developed technologies the Tjopt increased to 175°C continuous operating temperature. This leads to an about 25% higher output power and a high power cycling capability which is more than twice as high as conventional technology at Tjmax=150°C.Fuji Electric automotive IGBT modules are equipped with an On-chip temperature sensing diode, which provides a high accuracy ...
档案编号:
施工进度:
Fuji Electric sensors provide absolute and relative pressure measurement with high accuracy due to digital trimming and with a wide pressure range, full scale up to 700kPa absolute or 45MkPa relative. High accuracy sensors for Fuel Tank applications from -6kPa to +6kPa or specially designed exhaust gas sensor for the usage in the Diesel Particle Filter for example are also available. The sensors are provided with an overvoltage protection circuit, an EMC filter, and a surge protective device in the sensor chip; surge protection conforms to ISO7637-level 4 for automatic components and high reliability ensured by EPROM bit redundancy. Each sensor has a diagnostic self-detecting function in the event of a wire opened among Vcc, Vout and GND terminals.Fuji offers analog as well as digital Pres...
档案编号:
施工进度:
控制柜和面板充分有线控制柜单板解决方案通过全面的有线控制柜的钣金件 - 我们一直在实施著名的机器和设备制造商多年的定制解决方案。为了确保我们能够为您的要求和愿望最佳状态响应,我们将提供您:规划 - 建造 - 板材生产 - 批量生产 - 装配 - 安装我们非常重视质量,并通过DIN EN ISO 9001:2000认证。有关我们的控制柜,我们可以将CE标志并出具合格和制造商声明。我们可为您以生产和供应为以下产品:控制柜(标准和客制控制柜)机器外壳控制面板和控制站开关要求钣金工作,包括接线从我们在机械制造和设备安装工程的经验中获益随着我们在您身边,您会享受一个系统的合作伙伴可以提供的所有好处。我们的高素质的员工利用其承诺,远见和现代技术的储备,把客户的愿望和想法付诸优化协调产品和解决方案。规划我们的项目经理设计成本效益的解决方案,并确保与您协商交钥匙实现。建造我们用我们的板材专业知识,规划,设计和建造控制柜,控制面板和机器外壳。我们接管您的开关设备的完整的电气设计。钣金生产我们利用我们国家的最先进的机器根据每个客户的要求从简单的钣金零件到复杂精密零件制造的一切 - 快速、低价、到最后零售。当涉及到喷涂,您可以在所有标准RAL颜色或特殊颜色的纹理或光滑的粉末涂层之间进行选择。配线系列我们的控制柜的接线是基于国际标准。您会收到带有CE标志和符合性和制造商声明计划和成品控制柜。每个机柜都交付符合国家和国际相关标准或客户的要求才进行测试。全球装配和安装我们的服务不会与您的设备的交货准时结束。我们还装配,并按照国家特殊规定的全球安装的系统。原型打造独立的原型是从理念到现实的旅程中必不可少的一部分,并形成了批量生产的基础。 Baumüller Dravinja 具备能符合您的生产文件短时间内生产专业原型的能力 - 最高质量标准和制造完美。定制设计我们用我们的专业技术知识和长期的经...
档案编号:
施工进度:
移动应用驱动系统专为四象限运行,和b maXX mobil可以在两个方向刹车,除了产生驱动能量回收。移动使用中,控制器是抗振动,并可以在温度-25°到+ 65°摄氏之间使用。通信通过CAN总线和数字输入发生/输出将另外提供。该控制器在电池供电的车辆使用,如电动船和叉车,以及在许多电池供电的工业应用。例如,对b maXX mobil是适合用作与DSM盘电机,擅长由于其紧凑的设计,高度动态的运行特性和低维护要求的轮毂驱动。包米勒从而提供了一个节省空间和高性能的解决方案。
档案编号:
施工进度:
MaterialPlastic protective braid made of polyamide, oil-, petrol-, acid- and solvent-resistant, halogen-free, self-extinguishing and flame retardant, permanent operating temperature -55 ° C up to + 125 ° CMetal protection braid made of galvanized steel wire, Permanent operating temperature = + 300 ° C Heat insulationSilicone foam hosetemperature-resistant up to 200 ° C UseShort lengthsVery tight mounting conditions (small bending radii)Fixed installation or mobile sampling points (laboratory / test stand)Without mechanical stressIndoor installation
档案编号:
施工进度:
Profitec SN1是100%模拟充电器。所有控制与监测印刷电路板(PCBs)(表面贴装技术内置)不包含任何软件,无需可编程组件或设备。100%无软件电池充电整流器的发明可确保直流电源系统安全性,满足了防止供电系统损坏,免除费力认证的要求。