档案编号：
施工进度：
Optimised solutions for complex motion cyclesAUMA Drives helical worm gear units are provided for many connection and fastening options.For example, they can be directly mounted as slip-on gears (type SS_A) to the drive shaft of the driven machine and can be secured against turning by either using torque reaction levers (type SS_AD), output flanges (type SS_AF) or spigots and pitch circles at the housing.The basic variant type SSVA (solid shaft at input, hollow shaft at output) can be extended by drive and motor flanges, covers and many further options, such as slip-on output drive shafts.Slip-on gears within the gear hollow shaft can be axially secured both via end disc and circlip or via shrink disc.The following pictures provide an extract of the possible equipment variants.Please conta...
档案编号：
施工进度：
matching splinesUsing high-precision gear cutting machines, AUMA Drives manufacture worm wheel sets with splines in accordance with DIN 3975 profile ZK right-handed-ascending (AUMA Drives worm gear units can be operated in both rotation directions.Left-handed- ascending versions are available on request.).Compared to other profile shapes, their flank geometry makes ZK splines insensitive to wear which might be caused by misalignment such as bending of worm due to excessive torque loads or incorrect axes within the housing.
档案编号：
施工进度：
Our spectrum ranges from small mobile units up to stationary hydraulic systems. The operating pressures starts at 300 bar (4,350 psi) in the auxiliary hydraulics by 1000 bar (14,500 psi) in the working hydraulics up to 4000 bar (58,000 psi) in the high pressure hydraulics.It is important for us to analyze your application parameters to use adequate materials and components.We concern oneself, in cooperation with you, with the modernization and optimization of your existing facilities.Our team of experienced engineers and well trained technicians support you in the following situations:Trouble-shootingFind a solution / conceptual re-design and re-dimensioning (modifications)Construction of new facilities and expansion or re-construction of existing facilitiesIntegration into your machineryF...
档案编号：
施工进度：
A feature of this bolt tensioner is its low profile. The single-bolt tensioning device is low-cost and thus has a short payback period. It is used in many different industrial applications.
档案编号：
施工进度：
手动排水阀手动排水阀是所有的滤杯或过滤调压阀的标配。塑料泄放螺丝在可视透窗的塑料滤杯或金属滤杯上使用。金属泄放螺丝职无可视透窗的金属滤杯上使用，如需要，也可代替塑料泄放螺丝安装在任一带内螺纹的滤杯上。半自动排水阀当没有压力时（到达约0.5bar时），半自动排水阀打开。压力较高时可手动打开。可用于任何情况下，例如在夜里压缩气体系统关闭和泄放时。配备适当的插件，可安装在所有的塑料杯或带视窗的金属杯里。安装在不带视窗或G1/8内螺纹的金属杯上时不需要插件。手动操作：推进排水阀管子的铜插头可泄放冷凝水。外置自动排水阀全自动排水阀能代替手动排水阀或半自动化排水阀安装在ewo所有的过滤器或过滤调压阀上。可安装在任何带G1/8的内螺纹滤杯上。工作压力范围从约4bar 到16bar。在压力低于4bar时，阀门会被关闭，自动功能也关闭。在4bar到16bar 之间，当冷凝水达到特定的位置时，一个浮球会驱动气压伺服阀门使排水阀打开。在短暂的泄放后，阀门会再次关闭。紧急手动操作：可通过推动水平的突出销子来完成内置排水阀全自动嵌入式排水阀（Ф24mm），通过Ф14mm孔径和WZ19转换头，可安装在所有塑料滤杯上。阀门的工作压力范围从约1.5 bar 到12 bar。在压力低于1.5 bar时，阀门打开。在1.5 bar到12 bar 之间，当冷凝水达到特定的位置时，一个浮球会驱动气压伺服阀门使排水阀打开。在短暂的泄放后，阀门会再次关闭。紧急手动操作：可通过推动红色环圈来完成。
档案编号：
施工进度：
过滤器压缩气体过滤器用于排除工作区域空气中的杂质（冷凝水、管道结垢、生锈颗粒）。分2步去除杂质，通过气旋（清除冷凝水）和冶金过滤器（清除固体污染物）。端口尺寸： G1/8 到 G½ ， G¾ 到 G1½.40 bar 和 60 bar过滤器压缩气体过滤器组合设计带冷凝水排放、手动操作、烧结青铜过滤件。铝外壳（黑色电镀）、黄铜滤杯。包括压力滤杯的测试证明。微过滤器微量硼硅酸盐气体过滤器适用于所有对压缩气体纯净度要求特别高的场合，经过第2阶段的标准过滤后，它们除去了最细小的水分子，油，灰尘等99.9999%（相当于0.01µm）杂质，几乎没有任何残留粒子。残留油渣0.01ppm。端口尺寸： G1/8 到 G3/8 ，G3/8 到 G1.40 bar 和 60 bar 微过滤器具有冷凝水排放，手动操作的压缩空气过滤器设计组合。烧结青铜过滤元件。铝壳（黑色电镀）。铜制滤杯。包括压力滤杯的测试证明。微颗粒过滤器确保达到99.9999%（即0.01µm）最高质量和效果,。残留油渣含量0.01ppm。硼硅酸盐过滤件的滤芯孔径尺寸小于0.01µm，支撑套管由不锈钢(V2A)和泡沫塑料盖制成。流向从内到外。使用6个月后请进行调换。减压阀调压阀（膜片型）能保持压力恒定不受系统中的压力变化和气体消耗影响，提供二次气体排放，几乎完全不受初始压力影响，工作压力范围从0.5到3、6、10和16bar。用扭力臂或手轮进行工作。特殊型号可选（无二次气体泄放）。压力表可装在任一边。端口尺寸 G1/8 到 G½ ， G¾ 到 G1½ ， G1½ 到 G2.重要：始终推荐使用前置过滤器60 bar 减压阀调压阀（活塞型） 。端口尺寸G1。提供二次气体泄放，几乎完全不受初始压力影响，工作压力范围从0.5到12、22...
档案编号：
施工进度：
Ausführung: geradverzahnt, gespritzt, Eingriffswinkel 20°, Bohrung spanabhebend bearbeitet.
档案编号：
施工进度：
DC-motors (analogue and digital) as new equipment or spare part.DC-motors with self-surface coolingCE Ex II 2G EEx d (e) II C T3 ... T6 ATEXprotection class: IP 44 - IP 55cooling mode „Z“: IC 0041 – self-surface coolingEEx - Standard: DIN EN 50014 - 50018 - 50019terminal box: EEx d or EEx eProduct information PDF (133 KB)Table rated power in kW with T4 PDF (28 KB)Other design speeds and performances are available on request.Please send us your inquiry for an individual offer.
档案编号：
施工进度：
Constant current controller for magnetic particle clutches and brakes with optional PID-controller Z2 / Z4Magnetic particle clutches / brakes, fed by the LIEDTKE controller work independently of temperature and deliver a constant torque.The output current is adjustable in a wide range by the constant current control, independent of resistance by the connected load. ApplicationsOptional PID-Controller Z2/Z4 for:Unwind brakes / windingTorque controlTorque limitingSpeed controlClutch processStart controlTension force controlBrake controltorque measuringDancer controlSpecification for all controllers:net potential-freecontrol inhibitset-point voltage 0-10 VDCset-point integrator ± adjustableadditional reference input 0-10 VDCmin. / max. current limit adjustablequick stop functio...